- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
09-18-2013 12:18 PM
If I have two DSL connections, and 10 network segments, is possible configure on a PAN firewall one "trust" zone, tow "untrust" zone and send five segments for each one?
09-18-2013 12:25 PM
The PA firewall does not do load balance. You can do a redundant link setup. You can use PBF for that.
Configuring Policy Based Forwarding (PBF)
Thanks,
Syed R Hasnain
09-18-2013 12:54 PM
Hello Simon,
From your post , it's looking like you want a setup like below mentioned diagram.
Then, please follow the above document mentioned by Shasnain. https://live.paloaltonetworks.com/docs/DOC-3579
Note: make sure there are no asymmetric-routing happening between 2 ISP links.
Hope this helps.
Thanks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!