Panorama HA

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Panorama HA

L2 Linker

Hi Experts, 

 

We've Panorama in HA mode running on 8.1 and due to some reason, secondary is now active. Once the primary is back, with the preemptive checked, primary is still passive. 

 

Can someone please assist why primary is still passive?

 

Note: pls be noted preemptive isn't enabled on secondary(active now) 

3 REPLIES 3

L3 Networker

Hi,

 

Can you enable pre-emptive on secondary and check the failover?

 

compared to firewall HA, Panorama HA is much less complicated. 

 

And preemptive should be enabled in most cases so that primary member always returns to its active status.

 

Unlike firewalls, however, Panorama sticks to the primary and secondary roles throughout failures.

 

 

Best Regards,

Suresh

 

 

 

 

 

 

Sureshreddymudhireddy

Hi,

 

Thanks for the reply. But my concern is why the primary firewall is still passive with having pre-emptive enabled ?

Hi,

eeee

Can you enable pre-empt on secondary firewall and check once. And check that both are able to exchange keep alive messages or not.

 

Best Regards,

Suresh

Sureshreddymudhireddy
  • 2297 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!