02-01-2013 01:50 AM
Hello,
We use vsys on our PaloAlto cluster. During a new vsys deployment, I would like to validate that the passive device's physical connectivity to a switch is working.
But I don't wish to launch a failover just for this, because it could impact the whole cluster.
Is there any way to test physical or logical interfaces connectivity without any failover ?
Emmanuel
02-01-2013 10:52 AM
If you're running PAN-OS 4.1 or prior, you can set the HA passive link state to auto for L3 deployment, This will allow for the Ethernet links to be up if connected to a switch.
Starting in PAN-OS 5.0, you can set the HA passive link state to auto for L3 and vwire modes.
Thanks.
02-01-2013 10:52 AM
If you're running PAN-OS 4.1 or prior, you can set the HA passive link state to auto for L3 deployment, This will allow for the Ethernet links to be up if connected to a switch.
Starting in PAN-OS 5.0, you can set the HA passive link state to auto for L3 and vwire modes.
Thanks.
02-04-2013 12:13 AM
Many thanks for these useful information !
Best Regards
Emmanuel
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
