Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Portal Gateway priority clarification request

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Portal Gateway priority clarification request

Not applicable

We are having West Coast clients connect to our "backup" east coast gateway, which is a small sales office, and thus, cannot be "Manual Only".  We would like to adjust the gateway priorities to help keep all clients on West Coast connecting to the main gateway setup for those clients.

In reading documentation it states, "The agent will contact all of the gateways and establish a tunnel with the firewall that provides the fastest response and the lowest priority value." See https://<firewall>/PAN_help/en/wwhelp/wwhimpl/js/html/wwhelp.htm#href=global_protect.09.3.html#1245781

There are several "Priority" levels offered in configuration: Manual Only, Highest, High, Medium, Low, Lowest

Clarification Request:  Do we use "Lowest" for the portal we really want everyone to use, or "Highest"?  By the documentation listed above it seems like "Lowest" is correct answer, but "sounds" counter intuitive to natural english language interpretation that "Highest" would be the gateway you would want everyone to connect to.

Thank you in advance!

1 accepted solution

Accepted Solutions

L5 Sessionator

We use "highest" for the gateway that is most preferred, and you can select the Priority in that sequence ( highest, high, medium, low and lowest ). This setting is seen on the 5.0 and above versions. However on the 4.1.x versions, the priority is a numeric value between 1 and 5, with 1 being the highest priority and 5 the lowest ( similar to a ranking system).

BR,

karthik

View solution in original post

2 REPLIES 2

L5 Sessionator

We use "highest" for the gateway that is most preferred, and you can select the Priority in that sequence ( highest, high, medium, low and lowest ). This setting is seen on the 5.0 and above versions. However on the 4.1.x versions, the priority is a numeric value between 1 and 5, with 1 being the highest priority and 5 the lowest ( similar to a ranking system).

BR,

karthik

Please take a tech note to update your documentation for 5.x branch to say the following instead:

"The agent will contact all of the gateways and establish a tunnel with the firewall that provides the fastest response and the highest lowest priority value."

https://<firewall>/PAN_help/en/wwhelp/wwhimpl/js/html/wwhelp.htm#href=global_protect.09.3.html#1245781

  • 1 accepted solution
  • 2609 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!