Problem with access to WF-500 Appliance

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Problem with access to WF-500 Appliance

L2 Linker

Hello,

 

I try to access to the WF-500 via the Mgmt interface but I found the error message in the attachement.

 

What is the reason of this issue ? what should i do to resolve this problem?

 

I will appreciate all your helps.wildfire.JPG

1 accepted solution

Accepted Solutions

@RCHAIBI indeed, the mgmt is only accessible through SSH, the WF-500 quickstart guide makes this more clear than the admin guide 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

5 REPLIES 5

Cyber Elite
Cyber Elite

Is this just going directly to the management IP and you get this without entering anything? I would check to make sure you don't have your passwords saved and your browser isn't trying to login for you directly. 

Cyber Elite
Cyber Elite

Hi guys

 

The WF-500 doesn't have a regular management interface via webbrowser, you can only access the management part via CLI

 

There is a webserver running that can serve up reports, but that is accessed through the GUI of your firewall if you access the WildFireAnalysis report

 

2016-07-15_10-39-05.jpg

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Hello,

 

Thank your for your respones

@BPry , YES I get this message directly by login to the WF-500 by the default address 192.168.1.1. There is no history stored on th browser 

@reaper , In the administration guide of the WF-500 , I found tha is possible to administrate the WF-500 via the Mgmt  interface by the default address 192.168.1.1. 

So, I should setup the WF-500 with the CLI .

@RCHAIBI indeed, the mgmt is only accessible through SSH, the WF-500 quickstart guide makes this more clear than the admin guide 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

@reaper Thank you very much . I setup the WF-500 with the SSH and it works fine .

  • 1 accepted solution
  • 3114 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!