- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
09-24-2012 09:02 AM
Hi i have a few outstanding questions on Palo Alto devices. We just migrated from Juniper to PA line. So these might sound silly for people who already are on PA line.
Hoping to get answers for these .. Thanks a lot guys !!
09-25-2012 11:12 PM
Srikanth,
At this time there is no way to remotely turn off the the device using the CLI.
Once you restart the system , the first process the device does is auto-commit. The management plane of the device comes up first and then the dataplane.
So we need to wait for the auto commit to complete. Having the access of device GUI , does not necessarily mean that the device is ready to pass traffic.
If the auto commit is not complete we see the system initializing message, we can either wait or bypass it by allowing it to run in the back ground.
Autocomm can be monitored by the following command:-
>show jobs processed
Regards
Parth
09-25-2012 11:18 PM
Srikanth,
Netflow documentation :- https://live.paloaltonetworks.com/docs/DOC-2014
Tap mode implementation is to monitor the traffic over the network by not being inline:Generally this feature is used for evaluation/ POC etc. So to answer your last question , YES you can replicate the real time traffic on your firewall before you deploy by using tap mode https://live.paloaltonetworks.com/docs/DOC-2561
V wire implementation is like a bump-in-a-wire. Being inline and passing traffic through the firewall.
Regards
Parth
09-26-2012 01:40 AM
Thanks Parth very useful info.
Can you help me how to register Panorama and add devices with that?
I was given Panorama Auth code but not sure where do i use that.
Also i have device serial nos and auth codes but when i add that in Panorama it says auth code already used.
Not sure whats wrong with that. I followed admin guide when doing this
09-26-2012 02:16 AM
Srikanth,
Here is the document on "how to register a device and activating licenses:-
https://live.paloaltonetworks.com/docs/DOC-1257
Also go through the document below to get software downloaded for panorama
.https://live.paloaltonetworks.com/docs/DOC-2331
I am sure tou will find this helpful.If so, feel free to mark it.
If you still have problems registering the device/panorama please open a support ticket.
Also I highly encourage you to create a new discussion thread for each topic.
Regards
Parth
09-26-2012 02:22 AM
thanks for that ..
I did not get any serial no with panorama when i purchased these neither do i find it under the device tab .
Please find the attached
09-26-2012 02:44 AM
Srikanth,
This means that panorama is not registered.
Unable to Activate Support on Panorama
You should have the "Order Summary for Palo Alto Networks Order" e-mailed to you, which will contain the Panorama S/N.
If you cannot find it please contact your Authorized service center or Reseller from whom you got the device.
Regards
Parth
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!