Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-15-2019 09:25 AM
Hello,
I have two Domain Controllers, one is shown as Connected and the other is Not Connected.
-The 10.0.12.80 is a replica of 10.0.0.51.
-The server 10.0.12.80 is reachable by the management interface.
-When creating the LDAP Server Profile & adding in the Server List the address 10.0.12.80, the Base DN does auto populate when clicking the drop-down arrow. I use the same user and password for the new LDAP Profile.
-When adding group mapping and selecting the LDAP Server Profile created before, I do see the groups in that Domain Controller.
05-20-2019 05:10 AM
did you make sure the account you entered has WMI access on the second server and thee's no firewall etc running on the server?
02-05-2020 12:42 PM
Did you find a solution to this issue? I'm having the same problem with my PA5050's.
02-06-2020 12:42 AM
If one connects and the other does not then it's not the user itself.
Ensure CIMv2 is setup correctly as that's one usually missed.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGGCA0
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
