SSL Decrypt Mirror VLAN Tagging

Showing results for 
Search instead for 
Did you mean: 

SSL Decrypt Mirror VLAN Tagging

L0 Member



Wanted to start tagging the traffic going out of the decrypt mirror into our fireeye appliance. I read somewhere that tagging the decrypted traffic into the fireeye is recommended because apparently the fireeye appliance may have an issue distinguishing the normal unencrypted traffic and the decrypted traffic from the PA FW.


How would I go about doing that?





Cyber Elite
Cyber Elite

if you add a switch instead of a direct connection you can connect the mirror port to a access port in vlan 10 for example, then connect the fireeye to a trunk and allow vlan 10 and whichever other vlans you'd need


the mirror port itself does not vlan tagging

Tom Piens
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!