11-06-2017 06:58 AM
Hi,
Wanted to start tagging the traffic going out of the decrypt mirror into our fireeye appliance. I read somewhere that tagging the decrypted traffic into the fireeye is recommended because apparently the fireeye appliance may have an issue distinguishing the normal unencrypted traffic and the decrypted traffic from the PA FW.
How would I go about doing that?
Thanks
11-07-2017 02:58 AM
if you add a switch instead of a direct connection you can connect the mirror port to a access port in vlan 10 for example, then connect the fireeye to a trunk and allow vlan 10 and whichever other vlans you'd need
the mirror port itself does not vlan tagging
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
