Syslog parsing from Cisco WLC

Showing results for 
Search instead for 
Did you mean: 

Syslog parsing from Cisco WLC

L4 Transporter


we have a netwrok design where we want to filter some traffic from wifi zone to inside zone

But the problem is when we try to get syslog from Cisco Wlc or access point we see only hostname\ip address combination not username.

There is also an NPS server in the design where users get authentications.But we can not parse direct from NPS .we need some converter to convert SNMP  trap to syslog from NPS.

IT is ok when users connected through cable ,Because there is AD integration.But when they pass to WIFI where there is 802.1X authentication it is impossible to parse username\ip addresspaloalto-wireless (1).jpg

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!