06-30-2014 02:37 AM
Dear all,
What is the session timeout for unknown-tcp/udp?
Since this is an application which has no values set for timeout, can I conclude it will use the default-tcp/udp timeouts?
Kind regards
06-30-2014 04:56 AM
Yes, unknown sessions will follow the system defaults. you can see those in the document below.
How to View and Change the Default UDP Timeout Value
06-30-2014 04:56 AM
Yes, unknown sessions will follow the system defaults. you can see those in the document below.
How to View and Change the Default UDP Timeout Value
06-11-2022 12:30 AM
May I know the updated link? There are "Access Denied" be shown when I click the link
Thank you
06-13-2022 03:11 AM
Hi @JoeKwok ,
You may find the same info in the following KB:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cle6CAC
Cheers,
-Kiwi.
06-13-2022 07:37 PM
Thanks for reply.
May I know any document mention "unknown-tcp" follows system defaults (Device > Setup > Sessions > Session Timeouts)?
Since I found a case that timeout of "unknown-tcp" is still 3600 even the setting of system defaults was changed.
07-25-2022 06:13 AM
Hi,
Same here, we changed the default TCP timeout but the unknown-tcp application timeout is still set to 3600 seconds.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
