- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-29-2020 09:38 PM
Hi team,
My customer is facing the TCP out of order in pcaps while accessing SMB application.
He implemented the Zone protection in LAN zone which has Asymmetric path set as global, I changed it to bypass...
Will this resolve the issue...?? why TCP out of order is happening..??
.
01-30-2020 06:04 AM
Hi @sahithyan.subbu ,
I believe this topic was discussed many times before.
Check out this discussion on the matter:
https://live.paloaltonetworks.com/t5/General-Topics/tcp-out-of-order/td-p/230570
Cheers !
-Kiwi.
01-30-2020 01:09 PM
@sahithyan.subbu you're going to need to do some good oldfashioned troubleshooting to find out why
asking the community will not get you to the cause of this
you should start setting up packet captures along the route your packets take and figure out where exactly they are getting scrambled
is fragmentation a factor, is there latency, are there different routes being taken, are there aggregates/bonds/trunks where there could be a faulty uplink, could you use jumbo frames, is there a speed and duplex mismatch on a set of interfaces, ...
08-31-2020 05:22 AM
Hello Sahithyan,
I'm having the same problem currently with one of my customers; just wanted to check if you implemented any resolution and managed to get the traffic up and going again.
Appreciate your feedback.
Stay safe,
Ali
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!