Using Same layer 3 network with different vlan tag

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Using Same layer 3 network with different vlan tag

Cyber Elite
Cyber Elite

 

Need to confirm if we have layer 3 subinterface say 

 

network 11.11.1.2/24  vlan 100

network 11.11.1.3/24  vlan 200

 

It is possible to do this on  the PA?

 

 

MP

Help the community: Like helpful comments and mark solutions.
1 accepted solution

Accepted Solutions

L2 Linker

Yes, but you'd need to add each sub-interface into a different virtual router.  They can't have overlapping IP address space in the same VRouter - I believe an install error will occur when you try to commit policy.

View solution in original post

2 REPLIES 2

L2 Linker

Yes, but you'd need to add each sub-interface into a different virtual router.  They can't have overlapping IP address space in the same VRouter - I believe an install error will occur when you try to commit policy.

Thanks for confirming that.

MP

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 1902 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!