Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-26-2024 04:24 AM
Hi All,
I need to create a S2S Tunnel to a customer. We need to reach 1 Server on their side (e.g. 192.168.100.1). The connection is needed from multiple Hosts from 2 different Subents on our Side (10.0.112.0/21 and 172.18.2.0/24). The customer does not want to allow both subnets instead they want to allow only 1 IP.
Now my question is: Is it possible to create a NAT Rule to do source NAT (Source Zone LAN, Source Adresses 10.0.150.0/24 and 172.18.2.0/24 --> Destination Zone VPN, Destination Address 192.168.100.1 --> Source Translation Dynamic IP and Port with IP e.g. 172.16.1.1. With that setup the customer only needs to allow the IP 172.16.1.1 inside the tunnel.
In my understanding this should work since it's the same sceanario as when multiple Hosts are going to the Internet with the same public IP, corect?
Thank you all!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
