Hey, all. I have a PA-220 that I am trying to setup on my network. I connected it up and set up the layer 3 on it, then turned my router into an AP and lost all connectivity. Currently I have it connected to my modem on ethernet1/1, and As it is a residential connection obviously my IP is dynamic. I followed the dynamic configuration instructions as seen on the website, but my interface reports an IP of 0.0.0.0, which is where the default route points to. I believe it should e obtaining one from the ISP and applying it to the interface. I see ARPs for stuff over my wireless in the house, And I see IPs being assigned, but none of it has internet connectivity. does anyone have any thoughts on what to look at? My current e1/1 configuration is: (leaving out the set network interface Ethernet Ethernet1/1 layer 3 on all of it) ndp-proxy enables no Lldp enable no dhcp-client enable yes dhcp-client create-default-route yes Thanks.
... View more