Multicast configuration for IPTV

Reply
L2 Linker

Multicast configuration for IPTV

Hi all,

I'm lost configuring my PA-500 for IPTV using multicast.

My provider has a new option for IPTV.

They stated that in order to test the configuration one should try to open:

https://www.fiber7.ch/documents/129/Big_Buck_Bunny_Stream.xspf

 

So far I was not able to get this to work.

I understand that one needs to enable multicast on the virtual router.

I enabled it for the internal interface with IGMP enabled.

Whenever I add the external interface with PIM enabled I get an error message when validating the configuration

Failed to get IP address for interface ethernet1/1. (Module: routed)

 

Any hints appreciated how to get IPTV with multicast to work.

 

Regards,

  Andreas

Tags (2)
L2 Linker

Re: Multicast configuration for IPTV

sorry for bringing this old thread up again but I am currently facing the exact same thing. Have you managed to find a solution?

 

L2 Linker

Re: Multicast configuration for IPTV

Hi,

 

sorry, never found a solution for this problem.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!