Adding management interface to OSPF via CLI

[hfakoor2]

I'm doing a lab and I need to SSH to the firewalls to run some python scripts,

Is there a way to set OSPF to management interacee via set commands, with a management interface of 10.1.1.75?

I got the virtual-router default into OSPF, but I can't ping to my local PC.

I cannot ping to other devices in the lab, unless I source it from a virtual-router default enabled interface..

I want to add the management interface enabled for OSPF so I can ping out to my local PC (there's a default route in OSPF), and hence have a way to SSH into the device (currently my pings from my PC work to every device in my lab, except the PA firewalls)

can someone show me how to do this via CLI commands?

Thanks

[hfakoor2]

any advice would be appreciated 😄

[Raido_Rattameister · Accepted solution]

Check this post and follow same guidelines for CLI commands.

https://live.paloaltonetworks.com/t5/general-topics/cli-commands-to-create-a-ssh-profile-via-the-cli...

I don't think you can enable OSPF on management interface.

[hfakoor2]

Okay thanks