Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
09-28-2010 05:04 PM
When logged in via CLI on the PAN 500 and I view the ARP table, it says maximum of 500 entries. Does this mean that the PAN will only support 500 unique connections at a time?
I'm still trying to track down a problem I've been having with some machines unable to actually get out to the internet for a few minutes at a time and then they suddenly work. If there is a 500 connection limit then I think I have found my problem.
Thanks for any help.
09-28-2010 05:25 PM
Hi Kevin,
Yes, if there are more than 500 devices on the same subnet as the PA-500, then this will be a problem. More devices can be supported with a Layer 3 hop between them and the PA-500. The PA-500 can handle up to 64,000 sessions.
Cheers,
Kelly
09-28-2010 05:25 PM
Hi Kevin,
Yes, if there are more than 500 devices on the same subnet as the PA-500, then this will be a problem. More devices can be supported with a Layer 3 hop between them and the PA-500. The PA-500 can handle up to 64,000 sessions.
Cheers,
Kelly
09-28-2010 05:28 PM
Thanks Kelly.
So, If I were to put my Sonicwall back in as a Level 3 device and then do the PAN in vwire mode I should be set?
09-28-2010 05:30 PM
Yep, that should do the trick!
Kelly
04-14-2011 02:35 AM
Hi,
Is it possible to change the default ARP timeout?
Regards,
Radek
04-14-2011 10:46 AM
No, you can't change the ARP default timeout value.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
