Failed to generate selective push configuration. Schema validation failed. Please try a full push

[ChandrashekharD]

Dear Team,

We are getting below error

Failed to generate selective push configuration. Schema validation failed. Please try a full push

Panorama Version:10.2.7-h3

Panorama Model: KVM

system-mode: management-only

operational-mode: normal

Gateway details which are managed by this Panorama are as below:

PA-3220 version: 10.1.11.h4

P2-850 version :10.1.11.h4

PA-220 version:10.1.11.h4

We are facing this issue post upgradation of the Advisory for 7th April.

Kindly suggest the stable PAN-OS version to which we can upgrade  the Panorama and the Gateways to resolve the issue.

Regards,

Chandrashekhar

[JayGolf]

Hi @ChandrashekharD ,

Can you create a dummy change like adding and removing a character from a policy? Then, try a commit & full push again. 

[ChandrashekharD]

Thanks for your response

we have been doing the same to sync the gateways with the Panorama to perform full push every time.

Is there any permanent solution for this issue?

Kindly suggest if Panorama or gateway can be upgraded to fix it permanently.

[JayGolf · Accepted solution]

I found this response on a thread with similar issues:

@dkane66  wrote:

I would suggest anyone on 10.2.4 that is hitting this issue open a TAC case. I just had a call with a Root Engineer and they did the following.

1. Removed the corrupt file /opt/pancfg/mgmt/audit/cfg-audit.xml,v
2. From cli, ran debug md5sum_cache clear (this is to force gen all DG/TPL configs so their versions will get updated)
3. Did commit force which recreated the cfg-audit.xml,v
4. Did full push to firewalls and verified versions are getting updated on Panorama with a couple of commits.
5. Did a selective push to one of the firewall and verified the selective push is working.

---

[ChandrashekharD]

Dear JayGolf,

Thanks for your response,

That helps me a lot in understanding better

I opened a TAC case with root engineer