04-18-2024 01:42 PM
I have a firewall that for some reason after doing a version update to 11.1 is only taking 2 to 3 min to boot now. I noticed all the logs were not showing up and the interfaces was showing down, but everything was working. I decided to do a factory reset and only do the update to 11.0.2-h2. The reboot time went to 5 min and now the I can not change the duplexing. The only option is auto. Has anyone had this issue or even know what is going on?
04-24-2024 03:31 AM
Hi @dwythe ,
Any progress on this situation ?
Have you confirmed that auto-commit has finished after booting ?
Anything showing up on console port while booting up that could indicate some failure condition ?
Kind regards,
-Kim.
04-26-2024 03:02 AM
Hi.
I also observed the mentioned problems. After upgrading from version 10.2 to 11., physical interfaces were down, ipsec tunnels were down. Monitoring was overloading and sometimes not showing logs.
I would recommend that you downgrade to the previous version.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
