- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-22-2017 01:59 AM
Hi,
I'm setting up two PA5250s in HA and are connecting them up directly to each other. Since these are point-to-point links, i tried using a /31-bit subnet mask, as that is our usual norm for point-to-point links as per RFC3201.
Does anyone know why you can't use a /31 for this when they're directly connected to each other?
Thanks,
Eugene
05-22-2017 02:17 AM - edited 05-22-2017 02:17 AM
Hi @eugenep,
This is currently not supported.
Please ask your SE to add your vote to this feature request : FR ID 3591.
Cheers !
-Kiwi.
05-22-2017 02:17 AM - edited 05-22-2017 02:17 AM
Hi @eugenep,
This is currently not supported.
Please ask your SE to add your vote to this feature request : FR ID 3591.
Cheers !
-Kiwi.
07-11-2018 05:10 AM
Is /31 IP supported on non HA interfaces?? I.E outside interface towards the internet.
08-20-2022 09:50 AM
It works. Just todat 20th-August-2022 i configured it on one of ther Interface on PA-3220.
Initially it was not working as there was two layer2 switches, inline. Even it was not working on tagged sub-interface.
I connected Router and Firewall directly. Manually set the firewall's port speed to 100mbps as Router port speed was 100mbps, not 1Gbps and it worked for me.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!