How to shutdown a PA-4020

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How to shutdown a PA-4020

L1 Bithead

We need to shutdown a PA-4020 on 3.1.5 for relocation. "request restart system" no longer works. Does anyone know the new command line command?

Thanks

5 REPLIES 5

L4 Transporter

Hi There,

There is no command to do a shutdown - you can just pull the power.

The command to restart the system in 3.1.5 is as per the command you gave.  Maybe you're in configure mode and not in the top level CLI structure - i.e. where you enter after login.

Thanks

James

OK, Thanks James. I actually meant "request shutdown system". Seems odd not to have a shutdown on the firewall.

Thanks

Nick

We're not a standard Linux System using IPTables and so on Smiley Wink

Pull the power and have no fear.

Thanks

James

If there are hard disks writing configs, potential jobs pending, database transactions and you pull the plug you do not risk corruption without orderly shutdown??

Not applicable

Normally you can indeed simply shutdown a box without any problems. Just to make sure, I would connect via SSH to the box  and use 'request restart system" to make sure everything was written to the harddrive. The box will do a reboot and then I would poweroff it.

Mike

  • 5993 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!