Next Hop in default route using DHCP Comcast modem

cancel
Showing results for 
Search instead for 
Did you mean: 

Next Hop in default route using DHCP Comcast modem

L1 Bithead

Hello Group,

 

I am setting up a PA-200 in my SOHO with comcast as my ISP.  I have comcast for my isp and am using DHCP to optain my IP address.  My question is this.  Per the setup guide, if I check DHCP under the IPV4 tab, and check, Automatically create default route pointing to default gateway provided by server. Am I to assume this will create a default VR,  per the guide, there is a note that states :  If the ISP provides a modem from which the configuration can be obtained automatically, set the Type as DHCP Client.
Note: When "Automatically create default route pointing to default gateway provided by server" is enabled, a default route is installed in the virtual router, 'default'.

 

If this is the case, It doe Not do this?  I am currently on the current version 7.1.4h of the PANOS.

I have no problem creating the VR, but I have no clue what my next hop would be from Comcast.

 

Thoughts?

 

thank you

 

Bryan

4 REPLIES 4

L4 Transporter

Hi Bryan,

 

I understand that it will install a default route into the virtual router that you assign to the interface. If you commit this and then look at your virtual routers and click on 'More Runtime Stats' you'll be able to see the routing table of the virtual router with the route installed. In your configuration there will be nothing configured there, but you should see the route installed in the routing table.

 

hope this helps,

Ben

Cyber Elite
Cyber Elite

Hi

 

it will add a default route in the VR your interface is assigned

 

 

I created this a while ago: Getting Started: Firewall as a PPPoE or DHCP Client (with video)

Tom Piens
PANgurus

I'm not sure why but I get permission denied when I attempt to view your video.  

Hi @Rafael_Diaz

It was moved over to the knowledgebase:

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClTKCA0

 

 

 

Tom Piens
PANgurus
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!