01-21-2022 06:30 AM
We have 2 PA-5020 working as active/passive. We have dual SSDs configured in RAID and the SSD model on the active and passive device is SSDSA2CW12. We have to replace SSD in active firewall. However the RMA sent is a different model and is of size 240 GB. We went through a document Configuring RAID with Non-matching Models of SSDs for the replacement procedure. However we are not sure if there would be issues if we use 240 GB instead of 120 GB SSD in the active device. And how the partition allocation will take place. Also as the passive device will still run on 120 GB SSD, will there be any issues due to the mismatch between active and passive device SSD capacity.
01-27-2022 03:29 AM
Hi @RUNTEAM ,
Check out the following document, there's a section on 'Configuring RAID with 120GB and 240GB HDD'::
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClwcCAC
Cheers,
-Kiwi.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
