10-09-2025 08:01 AM
I'm reorganizing the network racks at my workplace and am ordering new cabling.. A college of mine mentioned hearing something in the past that there may be an issue with using ethernet cables shorter than 3ft in some cases. I searched around but am having trouble finding concrete information outside of that it may have been an issue with older technology but potentially not newer, less to do with the cable type and more to do with the cable length specifically.
10-09-2025 08:49 PM - edited 10-09-2025 08:49 PM
Hi @J.Logan ,
PAN doesn't specify a minimum Ethernet cable length for HA, interface, or management ports. Your plan to use Cat6 UTP cables is solid. Cat5e or Cat6 are both recommended for Gigabit links.
That said, ultra-short cables (under ~1ft / 0.3m) can sometimes cause minor signal reflection or strain issues due to tight bends. It’s not a problem for modern gear, but if space allows, going with 1ft–3ft cables is a safer best practice. So your planned lengths (6" for HA, 2ft for other ports) should be fine as long as the cables are high-quality and not sharply bent.
As far as cabling for HA, If your HA ports (HA1 / HA2) are directly connected between the two firewalls, it is recommended to use crossover. If they're not directly connected and through a switch, use a standard straight-through cable.
10-09-2025 08:49 PM - edited 10-09-2025 08:49 PM
Hi @J.Logan ,
PAN doesn't specify a minimum Ethernet cable length for HA, interface, or management ports. Your plan to use Cat6 UTP cables is solid. Cat5e or Cat6 are both recommended for Gigabit links.
That said, ultra-short cables (under ~1ft / 0.3m) can sometimes cause minor signal reflection or strain issues due to tight bends. It’s not a problem for modern gear, but if space allows, going with 1ft–3ft cables is a safer best practice. So your planned lengths (6" for HA, 2ft for other ports) should be fine as long as the cables are high-quality and not sharply bent.
As far as cabling for HA, If your HA ports (HA1 / HA2) are directly connected between the two firewalls, it is recommended to use crossover. If they're not directly connected and through a switch, use a standard straight-through cable.
10-10-2025 11:11 AM
Understood, thanks.
I'm curious why it is recommended to have a crossover cable. I found the cables we are using and have been for some time are not crossover and go directly from one firewall dedicated HA ports to the other firewall dedicated HA ports.
10-10-2025 04:31 PM - edited 10-10-2025 04:34 PM
Hi @J.Logan ,
Great question! I've always wondered that myself. I haven’t gotten an official word on this, but I personally believe the recommendation mainly comes from legacy best practices. Maybe sort of a "CYA" measure in case auto-MDI/MDI-X doesn’t behave as expected.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
