Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
12-18-2013 01:30 AM
Hi Gents, here is my PA design as active active.
to be clear, the server farm is connected to the Core switches, and the Clients are connected to both Agg switches.
the PA Configuration is in VWire mode.
the question here is, when I create a security policy to allow access clients to access the servers for specific applications on the servers.
should I configure a second policy to allow access from the servers to the clients also? or the second policy isn't required.
12-18-2013 04:58 AM
Hello,
Palo alto is a State full firewall.
If traffic is allowed in one direction return traffic for the same session will be allowed by default.
You don't need to specify second rule for return traffic unless traffic is been initiated from server instead of from client.
Regards,
Hari Yadavalli
12-18-2013 04:58 AM
Hello,
Palo alto is a State full firewall.
If traffic is allowed in one direction return traffic for the same session will be allowed by default.
You don't need to specify second rule for return traffic unless traffic is been initiated from server instead of from client.
Regards,
Hari Yadavalli
12-18-2013 05:32 AM
Hi Hari,
Thanks for your reply.
Appreciated
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
