I am on site now with client and i had some problem in deploying the PA-500, please i need your help:
I have configured PA-500 in Virtual-wire mode in a lan2lan liason between the two client sites and set the rule to allow any any. but when we try to test with phones to enregister from the callmanager server it's failed so i searched and i taught it's a vlan issue so instead of configuring default in Vwire tag allowed i set 0-4094. and still have the same problem. please note that also we tried to ping some IP addresses from the client distant site and they failed.
please any ideas about this issue.
thanks in advance.
You can do this using cli commands:
>set session tcp-reject-non-syn no
This command is non-persistent, does not survive reboot.
You can also use the below configuration mode command, which requires a commit and is persistent across reboot.
#set deviceconfig setting session tcp-reject-non-syn no
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!