VPN Site-to-Site Private IP and Public IP

[Metgatz]

VPN Site-to-Site Private IP and Public IP

Good afternoon everyone, is it possible to set up a Site-to-Site VPN between a site with a Palo Alto Private IP and a Palo Alto Public IP.

Site Privado: PaloAlto---IpWan-192.168.1.254---Router/Modem--------Internet-------Site Publico:IPWan:190.100.100.200

Thank you very much for your help and support, I remain attentive.

Best regards

[OtakarKlier]

Hello,

Yes it is! On the PAN with the private IP address make sure to give it a Local IP Address in the IKE Gateway setting.

Then on the other PAN point the IKE gateway at the public IP address however in the Ike Gateway, put in the Peer Address:

Hope that helps.

[Metgatz]

@OtakarKlier 

Good afternoon, thank you for your reply.

On the private IP side, I don't need to do any NAT or Port-Forwarding ?
That configuration would be enough ?

I remain attentive, thank you very much