Consuming user group in GlobalProtect SAML Authentication

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Consuming user group in GlobalProtect SAML Authentication

L0 Member

A bit of background: We are an all-Google G Suite company. We do not have internal LDAP servers. Everyone auths to Google. We are using PA 3060s as our firewalls and VPN systems.

 

We are getting ready to turn on SAML authentication for GlobalProtect. We are using Google as our IdP.

 

I've gotten it working, but I want to make policy decisions based on the user group that we are returning in the SAML assertion.

 

In Google, I have a user attribute with a "role" specified for each user, and then we are passing this back to the firewalls via a attribute mapping in our SAML App definition in Google.

 

Within the SAML authentication profile in the firewalls, I have set the User Group attribute to "role", and when I connect to the portal through Burp Suite, I see a SAML "role" attribute being returned from Google and asserted to the firewalls.

 

However, I have not found a way to use this "role" attribute in client IP pool assignments or in making policy decisions. I have tried making a local group that matches the "role" value, but that does not work.

 

Has anyone done this, or have any insight on this?

 

Regards,

 

Mark

25 REPLIES 25

L7 Applicator

Hi @mtsujihara

 

I don't know it this user-group-mapping fof SAML users is possible. Probably not because the default group-mapping in the WebUI requires an LDAP profile.

But may be you should give this a try for the creation of groups and containing users: https://www.paloaltonetworks.com/documentation/80/pan-os/xml-api/pan-os-xml-api-request-types/apply-...

L0 Member

Hi @mtsujihara

 

Could you please show me how to configure PA using Google SAML as IdP?

 

Thank you in advance,

 

Regards,

 

Army

L1 Bithead

I've gotten GSuite SAML2.0 working and have GSuite configured to send the user's "Department" as the "group" attribute. In the PA, I have the "User Group Attribute" set the "group". As the OP says, I don't see that I can use the "group" value anywhere (policies, etc).

 

Has anyone gotten this to work?

 

@MikeTewner,

The firewall won't let you use that attribute the same as you would with an LDAP group. The link that @Remo provided describes how you could probably script this to assign users to different groups using the xml-api and how you would format the input file that you would need to put together for this. 

I would recommend reaching out to your SE and setting up a feature request. 

L7 Applicator

@MikeTewner

It depends on how much you really need this group mapping for SAML authenticated users ... it will be a bit of work

 

  1. Set up a webserver
  2. Create a log forwarding profile for system logs that applies for global protect login and logout logs and send these logs to your webserver
  3. Create a web application on your webserver that processes these http request with the logs from your firewall
  4. For every log that the webserver receives your web application needs to push that information to the firewall API to create dynamic User-IP-Group mappings and also delete them when a user logs out

4 "simple" steps and you have implemented what you need 😛

 

But I recommend the feature request anyway ...

Thank you @Remo and @BPry for the help! This is one of the last services still stuck on our ActiveDirectory - I'll put in the feature request and live with it for a bit longer.

 

Just an aside for anyone else with this issue - Perhaps JumpCloud can help in this case.

 

-Mike

 

I dont know if this is still an issue for you, but i had a similar problem with Azure AD, so in the end created a secure LDAP connection to it and in the LDAP Group configuration changed the username to be email and that has worked both on Global Protect and Security rules.

Have anyone successfully implemented Group-Mapping with G-Suite?

Nope, still struggling with this same issues.  SAML authentication works great, but group information sent int he SAML assertion is not accessible in policy rules.  In my case, we have access to LDAP, but wanted to use SAML to be able to add Duo two factor authentication with a usable UI.  Opened a case with support, maybe all of us are wrong.

For what its worth, support confirmed that there is no group support with SAML authentication.  They referenced a prisma document: https://docs.paloaltonetworks.com/prisma/prisma-access/prisma-access-panorama-integration/authentica...  which does state: 

 

"You can’t use group information that’s retrieved from the SAML assertion in either security policies or the agent client configuration in the portal and gateways. If you have a requirement to configure user group-based policies and configuration selections, you must Enable Group Mapping and retrieve the user group information from the LDAP server using Group Mapping Settings."

 

However I did find an unsupported workaround at least in 8.1.   If you can do LDAP group mapping but want to use SAML authentication (which is what we want to support multifactor), then if you send over the SAML username in the form <domain>\<username> , it will match up to the AD/LDAP user and use the group mappings from LDAP, this may be what Ozamir references above.

 

This is no help for people who want to use Google exclusively. 

 

It is definitely an incomplete implementation since the SAML configuration supports both an "Access Domain Attribute" and a "User Group Attribute" but it does not use either one for global protect. (These are only used for Mgmt SAML authentication).

 

Hope this information helps someone else.

Hi There

 

I had the same issue with SAML and LDAP group memberships, I'm using DUO with global protect and my intend was to customize the application based on group memberships.

I used @JohnWade solution and under authentication profile I changed username attributes from user.username (as DUO instruction) to <domain>\<username> and it is working great.

thank you for the help.

All you need is the Metadata after configuring the app for your portal/gateway in the Google IDP.  You need two different apps for Portal and gateway if the addresses are different, unlike in Okta google doesn't support multiple URLs in a single app. 

 

goto SAML identity> create a server profile by importing the metadata.

create an Authentication profile and call the SAML server profile you created.

goto your portal and gateway > authentication> Set it to the authentication profile you created. Commit the changes.

We did this with Azure AD as well.

Out basic setup is as follows:

  1. Configure the LDAP Server profile for the on-premise AD infrastructure (Base DN is in the following format "DC=domain,DC=local" )
  2. Configure SAML IdP to work with Azure AD
  3. Configure Group-Mapping using the LDAP profile. On the "User and Group Attributes" tab, we swapped "Primary Username" to be "userPrincipleName" and "Alternate Username 1" to be "sAMAccountName"
    This way the SAML username attribute matches the LDAP username attribute
  4. On the GlobalProtect side, we specified the group in the configs in the following format: "CN=User Group Name,OU=org unit,DC=domain,DC=local"
    When we tried it in the "domain\group name" format, we had no success, but we found a post on reddit that suggested trying either format to see what works in your environment. Apparently the format is dependent on how your AD infrastructure is setup.

Hello,

 

This is indeed an excellent workaround, tested here also in 8.1. Thanks for this information, it's really useful.

 

Usually, we rely on our Active Directory, which is old enough to be primarily based on the SAM Account Name, which is what the NGFW is looking for by default, in the following format : Domain\SAMAccountName (ie. acme\doej)

We began using Okta to authenticate our GlobalProtect users for non-Windows or non-Domain devices, but it was impossible to use the "groups" attribute from the SAML assertion in the GlobalProtect configuration.

 

We opened a case with TAC, and the answer was the following : this attribute can only be used in the "Allow List" of the Authentication Profile, but nowhere else :

GREMAUDO_0-1604665329252.png

 

In order to make this work, the username sent by Okta in the assertion must be the same as the username that the NGFW understand by default, that is, the "Domain\SAMAccountName". This is not an easily available option in Okta.

In the GlobalProtect app in Okta :

2020-11-06_13h36_26.png

  • Edit the "Sign On" settings
  • Find "Credentials Details" section
  • Select "Custom" in the "Application username format"
  • Fill the field with this syntax : "yourdomain\" + toLowerCase(active_directory_xxxx.samAccountName)
    Please note that the "active_directory_xxxx" must match your directory ID, that you can find in the

2020-11-06_13h39_51.png

 

This only works, however, if you have an LDAP server somewhere... With Okta, I know there is a way to use it as an LDAP server, which might do the trick, like described in this link : https://help.okta.com/en/prod/Content/Topics/Directory/LDAP-interface-main.htm

 

With all this combined with a bit of Group-Mapping, you could tinker this to work as expected ! 🙂

 

It's unfortunate that PAN does not seem to want to integrate a wider use of the group attribute of the SAML Assertion. It complexifies the use of SAML, with little to no documentation... 😞

 

 

  • 30136 Views
  • 25 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!