Monitor power supplies using snmp on pa5020

cancel
Showing results for 
Search instead for 
Did you mean: 

Monitor power supplies using snmp on pa5020

L1 Bithead

 

  PanOS 7.1.10

 

  I am looking into how to obtain the status of the power supplies using snmp; most info's obtained via google point to snmp trap oid's for power supply failures. That's not exactly what I want; I want to be able to monitor the status of the power supplies using an snmp query (too).   Is this also possible ?

 

M.

1 ACCEPTED SOLUTION

Accepted Solutions

Community Team Member

Hi @marce1000,

 

I believe this currently only exists on the PA-7000 platforms (ENTITY-STATE-MIB : https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/monitoring/supported-mibs).

 

For other platforms like the PA-5000 there is an existing feature request for this (FR# 4873).

Please reach out to your local SE and have him add your vote.

 

Cheers !

-Kiwi.

View solution in original post

1 REPLY 1

Community Team Member

Hi @marce1000,

 

I believe this currently only exists on the PA-7000 platforms (ENTITY-STATE-MIB : https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/monitoring/supported-mibs).

 

For other platforms like the PA-5000 there is an existing feature request for this (FR# 4873).

Please reach out to your local SE and have him add your vote.

 

Cheers !

-Kiwi.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!