- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
07-02-2020 04:33 AM
I have a problem with Panorama M100, after each reboot I have no contact with it, it doesn't answer to pings and I can't get to the web interface. The problem has been occurring for a long time on many versions of the system, I created a case in Palo Alto portal and the device has been replaced. Recently during the upgrade to 9.0.9 and reboot it happened again. If I do a hard reset it starts correctly, there are no logs from the "freeze" period. Has anyone had a similar situation? This is the second M100 device with such symptoms, is it a flaw in this series or maybe an unfortunate coincidence?
Best regards.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!