03-03-2022 09:13 PM - edited 03-04-2022 06:58 PM
Hi Team,
We are facing an error in wildfire reports after upgrade to 10.0.8h4 . it says wildfire reports refuse to connect.
Please suggest any solution to check but if I upgrade to 10.1.3 it is working fine.
03-13-2022 08:28 PM
Hi Team,
It is known issue in PAN-OS 10.0.8 and Resolved in 10.0.9.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u0000004N9oCAE
03-10-2022 02:35 AM
Hi @SubaMuthuram ,
I believe this was an issue in 10.0.8 but fixed in 10.0.9.
There were some WildFire related fixes in 10.0.9: https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-release-notes/pan-os-10-0-addressed-issues/pan-...
Hope this helps,
-Kiwi.
03-10-2022 05:55 PM - edited 03-10-2022 05:57 PM
Hi @kiwi ,
Thanks for the reply, We have raised the same to the PA TAC, They have provided a workaround for the same. But still they are researching on the same, I will post here if they have given something this is an Some Web front-end issue.
03-13-2022 08:28 PM
Hi Team,
It is known issue in PAN-OS 10.0.8 and Resolved in 10.0.9.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u0000004N9oCAE
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
