Globalprotect report generation on users

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Globalprotect report generation on users

L1 Bithead

Is it possible to generate a report about the average logged in users in global protect

 

 

I can see who is currently logged in by going to Network>>gateway>remote user, but no reports on it. I also know the maximum number of users for that firewall PA3220 which is 1024 users

1 accepted solution

Accepted Solutions

Seems like there will be many more people interested to graph GlobalProtect capacity due to COVID-9 and WFH

 

I checked past forum posts, seems like there is no simple option to do it onboard. Perhaps good old SNMP will be of help here. We are planning to try out panGPGWUtilizationActiveTunnels.0. Please share your progress in this post

 

MIB detials at https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaSCAS

GlobalProtect gateway utilizationpanGPGatewayUtilization1.3.6.1.4.1.25461.2.1.2.5.1PAN-COMMON-MIB 
GlobalProtect gateway % utilizationpanGPGWUtilizationPct.01.3.6.1.4.1.25461.2.1.2.5.1.1PAN-COMMON-MIB 
GlobalProtect gateway max tunnelspanGPGWUtilizationMaxTunnels.01.3.6.1.4.1.25461.2.1.2.5.1.2PAN-COMMON-MIB 
GlobalProtect gateway active tunnelspanGPGWUtilizationActiveTunnels.01.3.6.1.4.1.25461.2.1.2.5.1.3PAN-COMMON-MIB 

View solution in original post

7 REPLIES 7

Community Team Member

Hi @RemusDV ,

 

There's an existing feature request for this.

Please reach out to your local SE and have him add your vote:

 

FR ID 2460 (GlobalProtect Reporting).

 

Until then you should be able to use the following workaround:

How to Run a Report for Previous Logged in GlobalProtect Users 

 

Cheers !

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Seems like there will be many more people interested to graph GlobalProtect capacity due to COVID-9 and WFH

 

I checked past forum posts, seems like there is no simple option to do it onboard. Perhaps good old SNMP will be of help here. We are planning to try out panGPGWUtilizationActiveTunnels.0. Please share your progress in this post

 

MIB detials at https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaSCAS

GlobalProtect gateway utilizationpanGPGatewayUtilization1.3.6.1.4.1.25461.2.1.2.5.1PAN-COMMON-MIB 
GlobalProtect gateway % utilizationpanGPGWUtilizationPct.01.3.6.1.4.1.25461.2.1.2.5.1.1PAN-COMMON-MIB 
GlobalProtect gateway max tunnelspanGPGWUtilizationMaxTunnels.01.3.6.1.4.1.25461.2.1.2.5.1.2PAN-COMMON-MIB 
GlobalProtect gateway active tunnelspanGPGWUtilizationActiveTunnels.01.3.6.1.4.1.25461.2.1.2.5.1.3PAN-COMMON-MIB 

Just to confirm, we build report polling two parameters. Both are generating nice accurate graphs.

  • panGPGWUtilizationPct
  • panGPGWUtilizationActiveTunnels

Community Team Member

Hi @RemusDV 

 

Aside from what's already been said ... the ACC might provide the data you're looking for:

 

https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-new-features/globalprotect-features/enhanced-log...

 

GP connection activity.png

 

Cheers !

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

This is actually a good solution. Even though it is available in 9.1(correct me if I'm wrong). I'll still advise the client. Thanks kiwi for the support

For those who are trying to get a list of GPA VPN users by the hour connecting via PRISMA or for those who have a Panorama that is connected to PRISMA, when you try to create a custom report that you can schedule to run every hour, you will notice in the fine print under the custom report creation that it does not support Cortex Data Lake logs. Thus your panorama cannot pull the data. it might pull it just 1x but never again. There is a feature request put up for that. In the meantime, the most you can do is generate the report manually , export to .csv and manually filter it by the time and manually remove the duplicate users. i use these filters:

Panorama/Monitor/mobileuserdevicegroup search by ( stage eq tunnel ) and ( status eq success )

Or

apps.paloaltonetworks.com/ Explore search by stage = 'tunnel' AND status.value = 'success'

Export the results as .csv and filter it by date/hour and remove the duplicates, all manually and if needed by the hour, manually run the search again on the hour. 

that's all you can do until they make it a feature on Panorama (Prisma).

in Explore, use Firewall/GlobalProtect. For Panorama, Monitor, Logs, GlobalProtect

  • 1 accepted solution
  • 13042 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!