- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
03-02-2020 01:16 PM
Hi guys,
Is there a requirement to allow traffic between either Remote network(s), or between Remote network toward Mobile, or between Mobile toward Remote Network .. and so on... etc.
Per example, from Mobile (which supposed to be "trusted"), I'm trying to touch IP address behing Remote Network. The log saids "deny" by the default interzone-default and "inter-fw" is showed as destination zone.
Do we have to configure that "inter-fw" zone with policy rules ?
Also, I notice a lot of deny with the name of the "remote network" as "source" zone, but that zone has never been configured nor policy for this.
What is the requirement of the "auto" zones used by Prisma but not created in Panorama... ?!
Thanks,
Dominic
03-05-2020 06:46 AM
Dominic,
You will need to configure a trust to trust policy to allow traffic from MUs to RNs and SCs.
The inter-fw zone is used by the cloud firewalls to pass traffic between them, you do not need to configure any rules for that.
03-05-2020 06:46 AM
Dominic,
You will need to configure a trust to trust policy to allow traffic from MUs to RNs and SCs.
The inter-fw zone is used by the cloud firewalls to pass traffic between them, you do not need to configure any rules for that.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!