Prisma SD-WAN Discussions

Console cable coming with ION 1200S

The console cable (the flat black one) that comes with the ION 1200S seems to be pinned out differently, do we need a specific driver to make it work

Device manager said it is working properly but the terminal is just blank and not responding.

Tr

SDWAN ion 1200s port issue

Hi Dears,

Currently I'm facing issue with multiple ION 1200s that when connecting to port 1 its blinking physically but its shows down on GUI and CLI but if I change from port 1 to 3 its working normally with the same cable.

Also already change t

How to troubleshoot the Faulty PSUs on Palo Alto ION 9000

Hi there, 

Can anyone please advise how to troubleshoot any PSU issues on ION 9000? 

API endpoint for Circuit health metric and Circuit Bandwidth Capacity metric

Hi 

Fetching few metrics from API but I don't see separate APIEnd point for  Circuit health metric and Circuit Bandwidth Capacity metric. 

Need help here ?

at present able to fetch same data with API : 

https://api.sase.paloaltonetworks.com/sdwan/m

Prisma SD WAN and Zscaler

With the Zscaler client already installed on computers, what are the available options not to send the traffic from an endpoint to the Zscaler VPN tunnel (IPSec or GRE) when an endpoint is in the office? 

What ends up happening is the endpoint is tun

SDWAN recommendations

I have to configure SDWAN in a scenario with one hub and several branches. All branches has the same network config only changing Public IP. This branches only has one transport (FTTH).

So mi questions are: Do you recommend to create a common templ

Need to know different metrics part of network_point_metrics_bw API

Hi ,

currently working with the SD-WAN monitor API endpoint (/sdwan/monitor/v2.0/api/monitor/network_point_metrics_bw) to pull bandwidth data for sites.

So far, successfully retrieved ingress and egress data using the "BandwidthUsage" metric in the r

Starting as a Prisma SASE SME and need help!

Guys I start tomorrow as a SASE SME and am looking for something like a runbook or any site setup guide. I did take the EDU-318 course via Udemy but it literally offered no hands on. Any help would be appreciated.

Not Receiving Bandwidth Capacity from SD-WAN Monitoring API

Hi team,

We're currently using the following API to retrieve bandwidth metrics:
https://api.sase.paloaltonetworks.com/sdwan/monitor/v2.0/api/monitor/network_point_metrics_bw

We're successfully receiving the bandwidth usage data; however, the response

Cortex XSIAM and Prisma SD-WAN integration?

Hi,

I am trying to understand the two products in the subject and how much integration there between them. I was not able to find a clear documentation or whitepaper where it says that Cortex XSIAM can ingest logs from Prima SD-WAN and how. Is there

In prisma sdwan unable to enable l3 forwarding

in strata cloud manager, could not enable l3 forwarding on ION virtual device and also rename ION name. 

6.5.1 performance

I am reaching out to see if anyone is running 6.5.1 and how performance has been.  We are running 6.4.1-b7 and are running into an issue where the ION's will initiate an HA event.   At one site, it was user impacting and at the second site, we did no

BGP Routing between vION and Connect Peer TGW in AWS

We have 2 vIONs deployed in AWS which are the Data Center devices and they are not in HA (Standalone). It has a BGP connections to the connect peer TGW (in AWS). How are the subnets of Branch Office advertised from vION to Connect Peer TGW. I can see