cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who Me Too'd this topic

ZTP Models can be deployed as a traditional models?

L1 Bithead

Hello guys, I want to know if someone has seen this behavior with Port Management Configuration on ZTP NGFW Models ... The IP address, Netmask and gateway shows an incorrect value 0.0.0.0 or Unknown, but the CLI shows the correct configuration parameters. We previously performed a "request disable-ztp" besides "Disable Device and Network Template" and "Disable Panorama Policy and Objects" on Panorama Settings. We thought that this behavior is causing problems when we trying to add a PA-3260-ZTP as a managed device on Panorama.

 

egarantiva_1-1616164599996.png

 

Who Me Too'd this topic