DNS Signature Lookup Timeout Error

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DNS Signature Lookup Timeout Error

L2 Linker

I'm seeing quite a lot of messages logged in the syslog output from my PA VM-100 running PAN-OS 10.0.0:

 

Aug 19 07:31:29 firewall-1 1,2020/08/19 07:31:29,007051000047085,SYSTEM,general,2560,2020/08/19 07:31:29,,general,,0,0,general,medium,"DNS signature lookup timed out",1461969,0x0,0,0,0,0,,firewall-1,0,0,1970-01-01T10:00:00.000+10:00

What exactly does "DNS signature lookup timed out" mean?

My VM has two local DNS servers configured, which are functioning well and the PA VM has access to do direct external lookups as well if it needs to do so.  It is located on the end of a quiet 250/100M internet fibre connection here in Australia, so connectivity and congestion is not an issue.

 

The DNS Signature Lookup Timeout (ms) value is set to 300 - far far above what should be necessary.

Can anyone explain the traffic flow that might cause this (do these DNS queries go direct, or via configured resolver, and over what transport) ?

 

If this is an error, how do I go about debugging it to find the root cause?

 

Thanks,
Reuben

12 REPLIES 12

L2 Linker

Hi Mate,

 

I would suggest identifying which traffic is causing these errors. Is it legit DNS query being timed out. Worth playing with the timers once more try increasing more, maybe some queries are timing out genuinely.

 

If it is like hitting a wall again, would suggest getting in touch with Palo TAC. Could be cosmetic bug or genuine misconfiguraton.

 

Hope that helps,

VR



Thanks & Regards,
Varun Rao

Thanks VR.

 

Can you suggest how I would find out what traffic it is?  The log message doesn't indicate much other than a DNS query timed out.  I'm assuming it is to do with the DNS Security feature.


Can you or anyone else explain the traffic flow behind this feature?  I can't find it documented anywhere.

Any resolution to this?

 

L3 Networker

Hi all,

I am also getting the same error in Paloalto. I changed the DNS signature lookup timeout to 2000 mseconds but still facing the same issue. Let me know if anyone got a solution or actual root cause of the issue

L3 Networker

I am  still facing the same issue, i have set the timers to 50000 😞

Community Team Member

Hi @nevolex ,

 

In DNS security, there is a DP timeout for waiting for the DNS security verdict.  When a DNS response comes after the timeout and the FW does not have a verdict, this response lets through. If the verdict is received later and indicates the previously let-through domain was malicious, this log is generated.

 

You could disable DNS security or set actions to allow.  A permanent fix should be available in PAN-OS 10.0.10.

If you're already running a newer PAN-OS version then you might be hitting a different issue and I would recommend reaching out to support.

 

Hope this helps,

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hi @kiwi 

I am using version 10.2.4, how do I set actions to allow please?

 

I currently whitelisted io.dns.service.paloaltonetworks.com, not to use app-id policy for that (I use service routes for palo alto inband traffic) and some of my policies have app-id with no ssl decryption  I noticed a few web services stopped working with app-ids, just too hard to fix when you just want to allow all from trust - to untrust zone 🙂

 

Than you 

Community Team Member

Hi @nevolex ,

 

You can change the DNS Security actions in the Anti-Spyware profile:

 

kiwi_0-1681380120565.png

 

Source: https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/threat-prevention/dns-security/enable-dns...

 

You might want to reach out to support to see if you're hitting the same issue as seen in PAN-OS 10.0 or if you're hitting a different issue entirely.

 

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

eeoe.pngstill having the same issue, very frustrating as Internet drops when that happens  

L3 Networker

the issue was very likely related to app-id (default-app) used in the outbound polices, allowing all the ports/ apps for paloato urls resolved the issue (works for 24 hours already without flapping )

not related to app-id (default-app) , still experience the issues 

it seems like the issue has been finally resolved by changing the mtu size on the wan interface to 1350bytes 

 

 

thank

  • 13571 Views
  • 12 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!