How can I see users hitting a certain NAT rule?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How can I see users hitting a certain NAT rule?

L2 Linker

Is this even possible? I know I can see the security rules being hit in the logs but what about the NAT rules?

1 accepted solution

Accepted Solutions

L5 Sessionator

Hi

You can look at the session id from the traffic logs for the session you are interesting in finding the NAT rule for and then go to the CLI and type

show session id (session id number)

and it will give you an output as below and you can look at the NAT rule that it is hitting.

admin@PA-2050> show session id 1

Session               1

        c2s flow:

                source:      192.168.86.205 [L3-Trusted]

                dst:         4.2.2.2

                proto:       17

                sport:       60968           dport:      53

                state:       INIT            type:       FLOW

                src user:    unknown

                dst user:    unknown

        s2c flow:

                source:      4.2.2.2 [L3-Untrusted]

                dst:         10.30.6.86

                proto:       17

                sport:       53              dport:      34370

                state:       INIT            type:       FLOW

                src user:    unknown

                dst user:    unknown

        start time                    : Mon Dec  3 23:28:12 2012

        timeout                       : 30 sec

        total byte count(c2s)         : 158

        total byte count(s2c)         : 229

        layer7 packet count(c2s)      : 2

        layer7 packet count(s2c)      : 1

        vsys                          : vsys1

        application                   : dns

        rule                          : rule1

        session to be logged at end   : True

        session in session ager       : False

        session synced from HA peer   : False

        address/port translation      : source + destination

        nat-rule                      : NAT4Trusted2Untrusted(vsys1)

        layer7 processing             : enabled

        URL filtering enabled         : True

        URL category                  : any

        session via syn-cookies       : False

        session terminated on host    : False

        session traverses tunnel      : False

        captive portal session        : False

        ingress interface             : ethernet1/6

        egress interface              : ethernet1/3

        session QoS rule              : N/A (class 4)

        DoS rule                      : L3-Trust2L3-Untrust

Please let us know if this helps.

Thank you

Numan

View solution in original post

2 REPLIES 2

L5 Sessionator

Hi

You can look at the session id from the traffic logs for the session you are interesting in finding the NAT rule for and then go to the CLI and type

show session id (session id number)

and it will give you an output as below and you can look at the NAT rule that it is hitting.

admin@PA-2050> show session id 1

Session               1

        c2s flow:

                source:      192.168.86.205 [L3-Trusted]

                dst:         4.2.2.2

                proto:       17

                sport:       60968           dport:      53

                state:       INIT            type:       FLOW

                src user:    unknown

                dst user:    unknown

        s2c flow:

                source:      4.2.2.2 [L3-Untrusted]

                dst:         10.30.6.86

                proto:       17

                sport:       53              dport:      34370

                state:       INIT            type:       FLOW

                src user:    unknown

                dst user:    unknown

        start time                    : Mon Dec  3 23:28:12 2012

        timeout                       : 30 sec

        total byte count(c2s)         : 158

        total byte count(s2c)         : 229

        layer7 packet count(c2s)      : 2

        layer7 packet count(s2c)      : 1

        vsys                          : vsys1

        application                   : dns

        rule                          : rule1

        session to be logged at end   : True

        session in session ager       : False

        session synced from HA peer   : False

        address/port translation      : source + destination

        nat-rule                      : NAT4Trusted2Untrusted(vsys1)

        layer7 processing             : enabled

        URL filtering enabled         : True

        URL category                  : any

        session via syn-cookies       : False

        session terminated on host    : False

        session traverses tunnel      : False

        captive portal session        : False

        ingress interface             : ethernet1/6

        egress interface              : ethernet1/3

        session QoS rule              : N/A (class 4)

        DoS rule                      : L3-Trust2L3-Untrust

Please let us know if this helps.

Thank you

Numan

Hi,

You can use the following command as well to see the user as what rule he would hit going to a particular destination.

admin@PA-500> test nat-policy-match source 192.168.1.25 destination 4.2.2.2 destination-port 80 protocol 6

Thanks,

Syed Hasnain

  • 1 accepted solution
  • 8995 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!