03-22-2020 06:11 AM
Hi All,
A quick query that I have seen on my minemeld install.
I have created a number of RBL lists and I can see that although the miner is pulling (or indicating) there are IPs to be mined, when I look at the Aggregator I see that it is not aggregating any and therefor the output is 0. This was not the case when I built them. Any ideas?
As an example here are the prototypes I am using:
Miner:
| attributes |
|
| source_name | malwaredomainlist.ip |
| url | http://www.malwaredomainlist.com/hostslist/ip.txt
|
Processor: minemeld.ft.ipop.AggregateIPv4FT
Output: minemeld.ft.redis.RedisSet
Regards
Adrian
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
