SFP Compatibility

[M.BERRIMA]

hello tech enthusiast, 

I want to connect a fiber cable between two PA firwalls, thats what i did but i have the interface down on both ends even, and i dont know what to put as a SFP Plus, when i run the command show system state filter sys.s1.p6.phy i have a vendor-part-number: SFP-10G-LR-PO but when i do that on a working interface a have vendor-part-number: "PAN-SFP-PLUS-LR" and its up, can you have some insight about this, thanks.

[kiwi]

Hi @M.BERRIMA ,

Here are the key specifications for Palo Alto Networks Interfaces and Transceivers:

https://www.paloaltonetworks.com/resources/datasheets/key-specs-for-paloalto-interface-transceivers

Hope this helps,

-Kim.

[M.BERRIMA]

Hi @kiwi 

It was heplful, i checked good info but i needed to look for SFP models that were compatible with palo alto. i will continue the search.

Thanks,