Who rated this post

Hello Mandar,

I hope, you took this CLI output from a PA-200 firewall. "false" mean, there are no alarm currently activated. If any incident/alarm is not active then the firewall will show as "false".

A PA-200 firewall is having one physical dual-core CPU, that represent through "6220 Core".  For Example, if you apply the same command on a PA-3000 FW, you will be able to see CAVIUM, OCELOT, INTEL etc.

The average value will be calculated based on multiple sample(3 sample mostly) taken within a small time interval,

For your better understanding, ihave given an example of 2 CLI command 1. >show system state filter env.* | match thermal   and >> show system environmentals

Hope this helps.

** Please mark my answer as correct/helpful if appropriate.**

Thanks