For this scenario, assume a simple setup. Two firewalls in HA and two switches in a stack. Also assume the firewalls are in active/passive. Consider the below setup, each firewall has one physical link to separate switch members of the stack. In this configuration, if switch member 1 fails and firewall 1 is the active firewall, does it automatically failover to firewall 2 if there is no link/path monitoring configured? Or are we to assume that without link/path monitoring, switch 1 failing and firewall 1 would remain active firewall and traffic to the internet would fail? I typically always use the below configuration. Each switch has a port aggregate (802.3ad) and 1 connection in that LAG connects to each member switch. This utilizes double the ports but I was under the assumption the first scenario would only work with link/path monitoring. I also typically do the design so I can withstand any firewall failing AND any switch failing at the same time. Finally, in the bottom configuration, does anyone have recommendation as far as setting up distribution configs on the switch side? (eg. mac src / dest). Are those needed?
... View more
