06-01-2018 08:13 AM
Hello,
I am having trouble with this configuration.
In a Windows domain environment.
I installed User-ID on server and confirmed User-ID is running and IP/user mapping is all listed in the monitoring log.
User-ID agent is connected in the firewall.
I created two AD groups one that permits FB and one that blocks it.
I created two security rules with two different URL Filtering profiles.
One URL filtering profile blocks FB the other doesnt.
I tagged a group to each rule: (I tweaked the original inbound to outbound rule that was in place before enabling User-ID). The rule without the user tagging worked previous.
Ex.
Allow Group has the URL filtering that allows FB
Block Group has the URL filtering that blocks FB
the FB block group precedes the FB allow group.
When I enable these rules-all outbound traffic stops
Not sure why...
06-01-2018 12:00 PM
Hello,
Best place to start would be the logs to see which rule is getting hit. Also I always put allow rules before deny rules just in case they conflict.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
