cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who Me Too'd this topic

NTP sync failing after PAN-OS 7.0 upgrade

L1 Bithead

I upgraded Panorama to 7.0 and then 7.0.1 recently and it seems to have broken my ntp synchronization in Panorama. Now I get "NTP sync to server x.x.x.x failed, authentication type none". If I run a "show ntp":

NTP state:

    NTP not synched, using local clock

    NTP server: x.x.x.x

        status: rejected

        reachable: no

        authentication-type: none


The NTP server is reachable (on same subnet) and is functioning for all other systems that use it. If I change the ntp server in Panorama to the host name or even another ntp server and commit, the GUI system monitor shows it syncs, but the next time it tries it fails. When using 0.pool.ntp.org I get the same thing happening. I've manually changed the system time to a few minutes off and then committed with a different ntp server (either internal or public) and it does sync, but will never sync after that first time.

2015/07/31 15:38:41 NTP time learnt; New time is: Fri Jul 31 11:17:31 PDT 2015'

2015/07/31 15:38:41 NTP restart synchronization performed

2015/07/31 15:53:42 NTP sync to server x.x.x.x failed, authentication type none


admin@Panorama> tail mp-log dagger.log

2015-07-31 15:35:26.034 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:26.484 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:26.943 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:27.404 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:27.854 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:28.274 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:28.713 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:35:29.184 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:38:52.805 -0700 OPCMD: handler "ntp_state"

2015-07-31 15:38:57.065 -0700 OPCMD: handler "ntp_state"

Who Me Too'd this topic