Teardrop Packet Buffer Overflow - SCCM TFTP

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Teardrop Packet Buffer Overflow - SCCM TFTP

L0 Member

Hello,

On our PA-5220 we hade 3 instances when our Packet Buffer Protection has been crippled by traffic from an SCCM server to a host.
Protocol TFTP UDP,  when VM's gone threw PXE boot and on file transfers from SCCM.

Symptoms are that latency goes upp well above 800ms crippling the network and 'show running resource-monitor ingress-backlogs' is working above 50% and seen stuck on 100%.

output from resource-monitor last 7 days ( PA-5220 was patched to 9.0.10 from 9.0.9 20 days ago so isn't a issue related to any specific version).

AFrank_2-1607291368848.png


Has anyone seen this before were Palo has registrered TFPT traffic from an SCCM server as DDOS?
If i compare the latency warnings in OP5 across our environment they match the timestamps perfectly.

AFrank_0-1607290987951.png

AFrank_1-1607291112113.png

AFrank_3-1607291558805.png

 


I've tried spinning upp 2 new Vm's, one that boots to the SCCM server in above images (HOST A) and one that boots to another SCCM server in the MPLS (HOST B) to verify.
Besides the one booting to HOST B taking much longer because of latency there was nothing registered and no disturbance in the environment so i cant seem to replicate the issue either..

0 REPLIES 0
  • 2708 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!