Expedition server sizing
Anyone know server sizing requirements for this? Minimum cpu, memory and storage?
Also, what is the recommended way to install?
Anyone know server sizing requirements for this? Minimum cpu, memory and storage?
Also, what is the recommended way to install?
I started by running the command
scp export log traffic start-time equal 2018/07/30@00:00:00 end-time equal 2018/07/30@23:45:00 to expedition@172.30.200.117:/PALogs/mltest.csvon my PA220.
root@Expedition:/PALogs# ls -l
total 64296
-rw-rw-r-- 1 expe
I created an OVA for my team and put it up here (Note, this isn't the official release now offered by PANW):
https://drive.google.com/open?id=1Z9GrCF8I_BZzpbEmEh6G75npo05_4G0c
Be sure to go Settings > M. Learning > and change the Expedition ML Addr
...
Expedition uses APACHE as a web server and PHP as module for the scripts. By default PHP allow users to upload files with a maximum size of 2M, this can be updated by changing the PHP.ini
sudo vi /etc/php/7.0/apache2/php.ini go to line where this ...
If additional cores or CPU's have been added to your Expedition but the number of CPU's is not updating in the UI, use the below steps to display the correct number.
$sudo rm /home/userSpace/environmentParameters.php
After remove that file go the
...
Hi,
After importing a ScreenOS configuration into Expedition 1.1.12, the dashboard shows 584 Addresses in Project Statistics.
But when going to Objects -> Address, only "No Address" is displayed in the left pane (despite I have "No Filters").
D
...
Hi all,
We have noticed on our expedition that when the logs from our Palo Alto firewalls are being process, they are not being deleted automatically. While processing the files i ran the comment # tail -f /tmp/error_logCoCo to track the progress o
...
Hi,
I'm using Expedition 1.1.12 and PanOs 8.1.7.
Since some time I fail in creating the ZONES via Expedition/API.
This while the creation of subinterfaces, Virtual router etc is working fine.
When sending the zone config by API, following message is
...
Hello,
It's exiting to once again be working with PaloAlto. I'm trying to export/import Securiyt Policy from R80.20 and have the following questions.
1. Is it supported? I see R80.10 option is greyed out.
2. When I run the suggested mgmt_cl
...
Expedition 1.1.3, BP 3.6.3, no internal checks to remediate, jobs and task managers up and running.
Got 2 PA VMs running 9.0.1 in an HA cluster. Created the required user to use API following the admin guide and https://www.youtube.com/watch?v=W0z8
...
Migrating a Fortinet config and I just finished remapping interfaces. I saw a previous thread on Base Configuration but it was unresolved. Wondering what the "base configuration" is defined as. Is it the same as "factory reset"? If I'm migrating
...
On page 11 of the User Guide, it says this:
"To convert to the proper naming convention, we can select the Ethernet1/1 who is parent for more sub-interfaces (vlan tags) and click on the Remap Interface Name located at the bottom left-side bar"
Wh
...
I have ended up in a bit of an odd situation with an undesirable result
In the process of importing CSV's from an unsupported source, I have ended up importing an entire rulebase into the "shared" VSYS of a standalone base firewall config. This m
...
The attached document describes the 'Admin Roles' that can be used when adding an admin account to devices connected to Expedition.
One key point to note is that Expedition does not need 'Commit' permissions.
Hi all,
One of our customer move from Checkpoint to Palo Alto (single VSYS and two zones).
The idea now is to split the network multiple zone and multiple VSYS (5).
I would like to use the 'Auto zone Assign' features so Expedition will calculate th
...
I'm having some trouble with Best Practices analysis and hoping someone here can confirm the functionality.
I have many devices managed by Panorama. Their configuration is built through a combination of some local device configuration and policies
...
The 'interzone-default' and 'intrazone-default' security policies are not included in the running-config or candidate-config files by default (no pun intended!).
If you want to apply the machine learning and the rule enrichment to these policies, t
...
Hello,
When I run export commands at the customer, I get an error as follows. Anybody have an idea?
mgmt_cli show access-rulebase offset 0 limit 400 name "Internet Security" details-level "full" use-object-dictionary true --format json > RuleSet_
...
Hi,
Is it possible to reset an expedition VM to factory default?
i.e. if someone is concerned that their vm is buggy and broken can they reset the box using linux cli without redeploying the vm from ova?
Thanks
Subject | Likes |
---|---|
1 Like | |
1 Like | |
1 Like | |
1 Like | |
1 Like |