I would like to perform a montly report, but in the scheduled page I can only choose between daily and weekly scheduling. I can do something on the CLI ?Thanks Boris
Hi All,I just managed to configure Palto Alto PA-500 captive portal to work with windows 2003 radius server i.e integrate with Active Directory. Based from the event viewer and log stated inside palo alto, the session was shown authenticated but somehow, upon authenticated at the user captive portal page... it will still show captive portal page...
Dear PaloAlto Support,Does Palo Alto support this VPN feature such as Dynamic VPN or Easy VPN? Customer will use Cisco Router at their branches. They want to connect VPN from all branches to their HQ. All branches will have dynamic IP and HQ will have static IP.Thanks,
I can't find documentation about connection Flags in command show session all-------------------------------------------------------------------------------ID/vsys application state type flag src[sport]/zone/proto (translated IP[port]) dst[dport]/zone (translated IP[port]I can see nothing, N...
Hi everybody,PA-500Software: 3.0.5Threat-Apps: 163-489URL Filter: 3243I have a question to the URL filtering profiles.When we add URLs to the block or allow list,and make a commit the listed URLs were not blocked or allowed.We need a second step, we open the URL profile againand change any category we want, only one is necessary!Then we make ano...
We're running into issues with the Palo Alto User Agent. It'll run for a few days, then we'll stop getting user information. When I look at the server running the agent, and try to start the agent, I get a message along the lines of "The paging file is too small for this operation to complete." We have a dedicated page file volume that's 4GB,...
Hi all,I know some IDS/IPS are able to keep the network connectivity during a reboot. Then it does not stop the trafic.Does the PA able to do the same in Virtual-Wire mode ? Or in other mode ?The aim is to upgrade the appliance in a production environment.Regards,Olivier
Hello PAN,Is there any way to obtain QoS data from the PAN logs other than doing a "show session id" CLI command in the current release 3.0.5? My customer would like to be able to see how much traffic is hitting the QoS classes and which traffic is hitting the QoS classes.Thanks
Hello,Could you give me the sample logs that the PA log before the following licenses expira ? - Support - URL Filtering - VSYS upgradeWe have the log of threat prevention license: - License for feature threat will expire on 2009/12/11Regards,
Our primary interface with devices and management systems is through the CLI. Essentially, what I need is a guide that explains the syntax and how to create/update/delete policies, security profiles, etc via CLI. (Neither the CLI Reference nor the Administrator's Guide seem to contain the information.)
Hello, I have PAN OS 3.0.5 installed on a cluster (active passive)The passive device seams to have problem to contact PANAs you can see from ommand below 10.44.36.125 Agent can't be reached (on active is ok) st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabella normale"; mso-tstyle-rowband...
Hello,With command tail I can read log from PAN FW. ...questions :what's difference between mp-log and dp-log ?what does the mp-log files below contain/mean (i.e ha_agent.log is for ha system) ?appWeb.log.old masterd_manager-infra.logbrdagent.log mgmt_fb.logcaptive_portal.log mp-monitor.logchasd.log ...
Hi,I see in the logfile the information :2010 01 04 10:07:25, ########################### Start Pan-Agent #############################2010 01 04 10:07:25, Add Domain: ce2010 01 04 10:07:25, Num. of Threads: 402010 01 04 10:07:25, GroupMemebers cache flag is 1.2010 01 04 10:07:25, Add DNS-style Domain: xxxxx.com2010 01 04 10:07:25, Add NetBIOS D...
Hi All,I encountered a situation :User in the RADIUS server authenticated successful with CISCO ASA RADIUS Server or Microsoft RADIUS but unable redirected to the desired page such as www.google.com or www.yahoo.com... The page just stay at the captive portal page... The PAN firewall log shows it successful authenticated... There is no policy b...
Hi All,I have question regarding captive portal... Can captive portal being done without require any NTML , AD or RADIUS server?Can the authentication being done inside the PAN box without the needs of User Idenfication Agent?Please help....
reaper
on:
Device Security license
reaper
on:
No proposal chosen ikev1
| User | Likes Count |
|---|---|
| 8 | |
| 2 | |
| 2 | |
| 2 | |
| 2 |
