PAN-VM 10.0.6 default username and password

[fedoracore123]

I downloaded the PAN-VM 10.0.6 from the customer site. It is showing me the PA-HDF login: prompt, when I type in the default username: admin and password:admin, it's showing incorrect username and password. Any idea how to fix this? 

[TomYoung · Accepted solution]

Hi @fedoracore123 ,

Since you post was 3 hours ago, you probably have already been able to login.  You have to wait for the 3rd prompt before you can login -> https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CloQCAS.  The PA-HDF login is the 2nd prompt.

Your VM was probably still initializing the software after the 1st boot.

Thanks,

Tom

[fedoracore123]

Thanks! its is working. 

[fedoracore123]

Hi Tom, For some reason I am stuck again. I am getting this prompt, it goes in a cycle (It asks me for a "old password" then "new password" and then comes back to the PA-VM login. Apologize if I am missing something basic. 

[TomYoung]

Hi @fedoracore123 ,

For a VM-Series, the PA-VM is the 3rd and final prompt.  Your new password should work.

Thanks,

Tom

[NavidAlam]

Hi I have same problem i will try to put password its keep asking same

do you want me to open TAC case 

[Milagros_Huacho]

Hi, you must consider this requirements to the new password.

[TomYoung]

Hi @NavidAlam ,

I believe after you change the password you have to commit the configuration for it to take.  I could be wrong.

Thanks,

Tom