Slowness with http file transfer after placing PA in-line

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Slowness with http file transfer after placing PA in-line

L4 Transporter

We recently place firewall in-lline and now when needing to use http file transfer it takes over 5 min. Before PA's  in transparent mode it was a 20sec process. Is there any thing I can  check to see why this is now happening?  Or something I need to modify? Over scp works fine but we are not looking to use SCP as primary file transfer method.

1 accepted solution

Accepted Solutions

FYI in case someone else has this issue i found resolution which is Enabling DSRI on the policy and that will resolve the issue and it fixed my companies issue

View solution in original post

7 REPLIES 7

L4 Transporter

I wanted to note that this is very intermittent. Fo rexample iso's  file tranfers are fast,  but  .jar files are slow

L5 Sessionator

Have you applied any security profile?

L3 Networker

I could not locate the model information, but i would suggest you compare the speed supported by the model and keep an eye on "CPU meter" at the home page to see if it spikes while file transfer.

 

Regards,

~Harry

Thanks for repsonse we have no security profiles applied adn are using the 7050

FYI in case someone else has this issue i found resolution which is Enabling DSRI on the policy and that will resolve the issue and it fixed my companies issue

If you users browse internet then users are client side and internet servers are server side.

DSRI means disable server response inspection.

It means that if you enable this then traffic from unknown internet servers towards you is not checked.

As good as not having Palo in between at all because you have no security.

Enterprise Architect, Security @ Cloud Carib Ltd
Palo Alto Networks certified from 2011

Community Team Member

Here's a learning article on DSRI that you might find usefull.

 

As the article explains, typically DSRI is used in environments where internal servers are trusted and protected by the firewall. In these cases, content inspection can be configured for only client to server (internet users to internal servers) traffic using the DSRI option.

 

Improve performance of HTTP with DSRI

 

Cheers,

-Kim.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 1 accepted solution
  • 9430 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!