Error local-inline-cat unexpected here commit

Hi team

Currently, when I try to perform a confirmation from Panorama, I receive this error on the passive node, while the active node performs the confirmation correctly.

I didn't do upgrades recently

Validation Error:
    vsys -> vsys1 -> profil

Do I need an edge router in front of my Palo Alto?

having a general discussion about architecture with a colleague and after thoughts from a wider audience.

By deploying my Palo Alto in an Active/Active pair I can connect my firewalls directly to the ISP/MSP and use BGP to control route traffic.

PAN-OS 11.1.13 Predefined reports displaying IPv4 addresses in IPv6 format

We have been experiencing an intermittent problem with our nightly predefined reports displaying IPv4 addresses in IPv6 format.
An IPv4 address like 192.168.1.1 is being displayed as an IPv6 address like ::0101:a8c0:ffff:0

We are currently running P

In which cource , I'll get practical lab

In which cource , I'll get practical lab access or firewall access, I want learn firewall with practical 

2 ISP SDWAN, traceroute show ip second ISP at hop 5 then return to ISP primary

I have 2 ISP/WAN with SDWAN, but when i traceroute speciffic IP, from hop 1-4 run via ISP-1

hop 5 change to ISP-2 then hop 6 return to ISP-1, and traceroute result is reuquest time out

but if i run traceroute bypass doesn't use paloalto, traceroute n

URL Category Change Request for www.intusjuntsparlament.com

Subject: URL Category Change Request for www.intusjuntsparlament.com

Dear Palo Alto Networks URL Filtering Team,

I am writing to request a category change for the following URL:

URL: https://www.intusjuntsparlament.com/chat

Current situation: This we

Re: How and Why to Accept Solutions

I am facing this when i try to login with default password- admin and admin. i have vm kvm serious 30 days trail series.

need support and help

'cfg.general.need-acknowledgement-to-login': NO_MATCHES

Asymmetric Routing - Palo Edge Firewall Active/Passive to Nexus Core

We have (2) equal cost L3 links from our Nexus core switches to an upstream Palo edge firewall HA pair, active/passive. On the firewall, this is an aggregation ethernet with layer 3 subinterfaces defined.  There is an SVI on each Nexus switch for rou

QUEST Tools "Error loading" 20/01/2026

Hi All,

We not able to access Quest Tools this morning and receive error as screenshot.

Please check if there issue on the backend.

Does User ID Agent 10.2.4 compatible with PAN OS 11.1.13?

I’m planning to upgrade my PA-440 from PAN-OS 10.2.8-h3 to 11.1.13.

Based on what I’ve read, PAN-OS 11.1.13 is not compatible with my existing User-ID Agent version 10.2.4. I tried upgrading the User-ID Agent to version 11.0.3, but I encountered an

Superreader User Privilege Not Available on WF-500 Appliance

When configuring user privilege on WF-500 appliance, I notice there is no superreader user privilege.

But, when I checked from WF-500 appliance configuration documentation, there is superreader user privilege.

I cannot find a similar issues where sup

account activating

I did not activate my MFA, and now the link is not working.

any idea what to do ?

Multiple High/Critical Alert Detected via Port 18264 | Possible FP

Hi ,

i would like to seek clarification clarification regarding a threat detection observed on our Palo Alto firewall, which we believe may be a false positive. During our review of the threat log, we noticed that the detection from below source an